eyearm18

How to Replace Door Locks Replacing the door lock could be a tricky task. It is crucial to secure your home from intruders. You should also replace your locks when you have an additional housemate or if you rent your house. Most new locks have been made for standard width doors. If your door is thicker and wider, you'll need to purchase a “thick door” kit which has larger screws and a larger tail piece for the deadbolt. Remove the old lock If you're changing your door lock it is necessary to remove the old lock from the door. This can be accomplished with a few basic tools, but it's crucial to ensure that you don't cause damage to the frame or door. Making use of the right tools will save you money on future repairs. Take off the screws that are on the handle and trim. You can use a screwdriver to accomplish this. After the screws have been removed, you can pull the trim off. Then, you can access the screw that holds the handle and trim to the door. After removing the screw you can open the handle and take out the lock cylinder from the door. One of the most obvious indicators that your lock is failing is when you are unable to longer move the key inside. This is due to the tumblers wearing out, and eventually will stop moving upwards or downwards and thereby limiting the lock's ability to function. If this happens, you'll need to bring the lock to a locksmith for it to be reset-keyed. Begin by removing the screws holding the faceplate in place. If your kit does not include new screws, you can purchase them at an hardware store. If you are installing a mortise locking, you will also need to remove the screws holding the external roseplate to the door. After you've removed all screws, pull the dead bolt and plate away from the door. Then, search for a hole in the handle's interior trim. If you spot one, slip a straightened safety pin into it. You can also try using a flat screwdriver in an opening or slot. Repair My Windows And Doors should release the lock handle and expose screws that can be removed to remove the entire lock from the door. Fitting the new lock If you're looking to replace your lock following a break-in or simply want to update the appearance of your door, installing an entirely new lock is easy. However, it is essential to measure your door to ensure that you purchase the right lock that is the right size for your door. This is particularly crucial for deadbolt locks, which must be a specific size to fit in the strike pocket and bolt plate. Contact your local hardware store for help when you're not sure what size to use. If you're replacing mortice locks, you can use the existing centre rail as a guide for positioning the new mortise lock. Once you've determined the location of the lock, you'll need to drill holes along the centre line which are the same width of the lock. After that, chisel the wood away until you have a rectangular space to accommodate your mortice lock. After that, you can insert the lock and trace the faceplate using an outline knife. Mark and drill screw holes to secure the faceplate. When rekeying locks you can save money by purchasing a starter kit which includes a set of re-keyable keys and a blank key. The kits are available from many online retailers as well as hardware and home improvement stores. The kits also come with instructions to assist you in completing your project. If you're renting, be sure to check your lease before changing locks. It may require you to give the landlord a key to the new lock. You may have to replace the lock with a standard one if you have to do this. You can buy a basic lock at your local hardware store or you can invest in a high-tech lock that connects to your home's WiFI network and lets you lock and unlock the door remotely. Schlage Smart Lock is compatible with all levers and knobs. The system can be linked to a security hub for your home to allow you to receive alerts whenever your door is not locked or opened. Installing the new lock A damaged lock poses an enigma for security, which is why it is essential to replace it quickly. Luckily, replacing locks for doors is a simple and quick project that anyone can tackle. The first step is to remove the lock that was previously used. This is accomplished by removing the screws that secure it and then removing it. You may need either a screwdriver or an Allen wrench depending on the kind of lock you own. After you have removed the lock that was previously used take all the parts and put them in a safe place. Then, insert the new lock onto the door. Most kits come with an image of the cardboard template that shows how the lock will fit to the door. If the template doesn't match your door, you can use a pencil to trace around it or a Chisel to remove extra material. After the new lock is in place, make sure the latch plate's interior is aligned with the mortise lockset hole to ensure a secure fit. When you install the new lock, be cautious not to tighten it too much. This can cause the lock to rattle or even break. If you have a lock that is keyed, check that the spindle is in alignment with the knob's hole. If it isn't you can make use of a screwdriver to push the spindle through the lock and into the knob. Install the baseplate with the design that is included with the lock after you've completed installing it. If the lock isn't equipped with a base plate with a design, you can buy one that matches the hardware. Test the new lock to confirm that it is working. This can be done by inserting the lock key and turning the lock to ensure that it opens. If this doesn't work, you must call a locksmith. You can also stop burglaries by having an expert rekey your locks. This involves changing the internal tumblers of your lock to make it insensitive to the keys you have previously used. This will allow you to feel secure and safe at home. Testing the new lock Installing a new lock is a great method to ensure that it will work according to the specifications. This is why it's important to follow the directions carefully. If you don't follow them, you could not be able to open your door. If you're not sure of what to do, call a professional locksmith for assistance. A locksmith can also provide guidance on the best locks for your home. If you're having difficulty opening your lock it could be a problem with the handle or latch. Try lubricating your latch with graphite or spraying it with WD-40. In some cases, this will fix the issue. It may be necessary to replace the latch if the latch isn't working properly. Another possibility is that the lock was installed incorrectly. The door handle clip can be broken or not present on the new lock. In this case, you should grasp the handle from the inside and then insert a new plastic retainer clip. The handle can then be linked to the lock and the lock tested. After you've changed the lock, it's important to test the keypad to be sure that it's functioning correctly. You can test the keypad by inserting it and turning it. If the keypad works correctly, your door will be able to unlock and lock. It is also advisable to check the deadbolt lock to see if it's functioning correctly. If it isn't, you should remove the latch and loosen the Phillips head screws on the side of the door to open it. Remove the old deadbolt and replace it with the new one. Orient and load the deadbolt lock properly. Another method of testing the new lock is by using the spindle test. This can be done by putting a screwdriver into the spindle. This test should be carried out prior to reinstalling a lock in order to avoid any errors.